libexplain  1.4.D001
Functions
libexplain/writev.h File Reference

explain writev(2) errors More...

#include <libexplain/gcc_attributes.h>
#include <libexplain/large_file_support.h>
#include <sys/uio.h>

Go to the source code of this file.

Functions

ssize_t explain_writev_or_die (int fildes, const struct iovec *data, int data_size) LIBEXPLAIN_WARN_UNUSED_RESULT
ssize_t explain_writev_on_error (int fildes, const struct iovec *data, int data_size) LIBEXPLAIN_WARN_UNUSED_RESULT
const char * explain_writev (int fildes, const struct iovec *data, int data_size) LIBEXPLAIN_WARN_UNUSED_RESULT
const char * explain_errno_writev (int errnum, int fildes, const struct iovec *data, int data_size) LIBEXPLAIN_WARN_UNUSED_RESULT
void explain_message_writev (char *message, int message_size, int fildes, const struct iovec *data, int data_size)
void explain_message_errno_writev (char *message, int message_size, int errnum, int fildes, const struct iovec *data, int data_size)

Detailed Description

explain writev(2) errors

These functions may be used to obtain explanations for errors returned by the writev(2) system call.

Definition in file writev.h.


Function Documentation

const char* explain_errno_writev ( int  errnum,
int  fildes,
const struct iovec *  data,
int  data_size 
)

The explain_errno_writev function is used to obtain an explanation of an error returned by the writev(2) system call. The least the message will contain is the value of strerror(errnum), but usually it will do much better, and indicate the underlying cause in more detail.

Parameters:
errnumThe error value to be decoded, usually obtained from the errno global variable just before this function is called. This is necessary if you need to call any code between the system call to be explained and this function, because many libc functions will alter the value of errno.
fildesThe original fildes, exactly as passed to the writev(2) system call.
dataThe original data, exactly as passed to the writev(2) system call.
data_sizeThe original data_size, exactly as passed to the writev(2) system call.
Returns:
The message explaining the error. This message buffer is shared by all libexplain functions which do not supply a buffer in their argument list. This will be overwritten by the next call to any libexplain function which shares this buffer, including other threads.
Note:
This function is not thread safe, because it shares a return buffer across all threads, and many other functions in this library.
Example:
This function is intended to be used in a fashion similar to the following example:
 ssize_t result = writev(fildes, data, data_size);
 if (result < 0)
 {
     int err = errno;
     fprintf(stderr, "%s\n", explain_errno_writev(err, fildes, data,
         data_size));
     exit(EXIT_FAILURE);
 }
The above code example is available pre-packaged as the explain_writev_or_die function.
void explain_message_errno_writev ( char *  message,
int  message_size,
int  errnum,
int  fildes,
const struct iovec *  data,
int  data_size 
)

The explain_message_errno_writev function is used to obtain an explanation of an error returned by the writev(2) system call. The least the message will contain is the value of strerror(errnum), but usually it will do much better, and indicate the underlying cause in more detail.

Parameters:
messageThe location in which to store the returned message. If a suitable message return buffer is supplied, this function is thread safe.
message_sizeThe size in bytes of the location in which to store the returned message.
errnumThe error value to be decoded, usually obtained from the errno global variable just before this function is called. This is necessary if you need to call any code between the system call to be explained and this function, because many libc functions will alter the value of errno.
fildesThe original fildes, exactly as passed to the writev(2) system call.
dataThe original data, exactly as passed to the writev(2) system call.
data_sizeThe original data_size, exactly as passed to the writev(2) system call.
Example:
This function is intended to be used in a fashion similar to the following example:
 ssize_t result = writev(fildes, data, data_size);
 if (result < 0)
 {
     int err = errno;
     char message[3000];
     explain_message_errno_writev(message, sizeof(message), err, fildes,
         data, data_size);
     fprintf(stderr, "%s\n", message);
     exit(EXIT_FAILURE);
 }
The above code example is available pre-packaged as the explain_writev_or_die function.
void explain_message_writev ( char *  message,
int  message_size,
int  fildes,
const struct iovec *  data,
int  data_size 
)

The explain_message_writev function is used to obtain an explanation of an error returned by the writev(2) system call. The least the message will contain is the value of strerror(errnum), but usually it will do much better, and indicate the underlying cause in more detail.

The errno global variable will be used to obtain the error value to be decoded.

Parameters:
messageThe location in which to store the returned message. If a suitable message return buffer is supplied, this function is thread safe.
message_sizeThe size in bytes of the location in which to store the returned message.
fildesThe original fildes, exactly as passed to the writev(2) system call.
dataThe original data, exactly as passed to the writev(2) system call.
data_sizeThe original data_size, exactly as passed to the writev(2) system call.
Example:
This function is intended to be used in a fashion similar to the following example:
 ssize_t result = writev(fildes, data, data_size);
 if (result < 0)
 {
     char message[3000];
     explain_message_writev(message, sizeof(message), fildes, data,
         data_size);
     fprintf(stderr, "%s\n", message);
     exit(EXIT_FAILURE);
 }
The above code example is available pre-packaged as the explain_writev_or_die function.
const char* explain_writev ( int  fildes,
const struct iovec *  data,
int  data_size 
)

The explain_writev function is used to obtain an explanation of an error returned by the writev(2) system call. The least the message will contain is the value of strerror(errno), but usually it will do much better, and indicate the underlying cause in more detail.

The errno global variable will be used to obtain the error value to be decoded.

Parameters:
fildesThe original fildes, exactly as passed to the writev(2) system call.
dataThe original data, exactly as passed to the writev(2) system call.
data_sizeThe original data_size, exactly as passed to the writev(2) system call.
Returns:
The message explaining the error. This message buffer is shared by all libexplain functions which do not supply a buffer in their argument list. This will be overwritten by the next call to any libexplain function which shares this buffer, including other threads.
Note:
This function is not thread safe, because it shares a return buffer across all threads, and many other functions in this library.
Example:
This function is intended to be used in a fashion similar to the following example:
 ssize_t result = writev(fildes, data, data_size);
 if (result < 0)
 {
     fprintf(stderr, "%s\n", explain_writev(fildes, data, data_size));
     exit(EXIT_FAILURE);
 }
The above code example is available pre-packaged as the explain_writev_or_die function.
ssize_t explain_writev_on_error ( int  fildes,
const struct iovec *  data,
int  data_size 
)

The explain_writev_on_error function is used to call the writev(2) system call. On failure an explanation will be printed to stderr, obtained from the explain_writev(3) function.

Parameters:
fildesThe fildes, exactly as to be passed to the writev(2) system call.
dataThe data, exactly as to be passed to the writev(2) system call.
data_sizeThe data_size, exactly as to be passed to the writev(2) system call.
Returns:
The value returned by the wrapped writev(2) system call.
Example:
This function is intended to be used in a fashion similar to the following example:
 ssize_t result = explain_writev_on_error(fildes, data, data_size);
 if (result < 0)
 {
     ...cope with error
     ...no need to print error message
 }
ssize_t explain_writev_or_die ( int  fildes,
const struct iovec *  data,
int  data_size 
)

The explain_writev_or_die function is used to call the writev(2) system call. On failure an explanation will be printed to stderr, obtained from the explain_writev(3) function, and then the process terminates by calling exit(EXIT_FAILURE).

Parameters:
fildesThe fildes, exactly as to be passed to the writev(2) system call.
dataThe data, exactly as to be passed to the writev(2) system call.
data_sizeThe data_size, exactly as to be passed to the writev(2) system call.
Returns:
This function only returns on success, see writev(2) for more information. On failure, prints an explanation and exits, it does not return.
Example:
This function is intended to be used in a fashion similar to the following example:
 ssize_t result = explain_writev_or_die(fildes, data, data_size);